Chippable Ezk/ignition Control Box For Lh2.4
 

Hi all,
I'm looking for an chippable ignition control box to continue my +t project. The Bosch number is usually 0 227 400 XXX. This is not the box that says "Jetronic" on the front.
You can tell if it is chippable by popping the top off (four torx screws). If there is a daughterboard at right angles to the main board then it is chippable, if it just has a flat motherboard then it is not. Apparently it does not matter if it comes from a turbo car or not. Car is running LH2.4
I've not been able to find a daughterbord kit to add to the box I have, if anyone knows where to get one please let me know!
Any help appreciated.

Have you tried Lakes near Bedford?

http://www.lakes4volvo.co.uk/

Thanks Suterman
He has loads of boxes but unfortunately can't tell from the outside whether it's suitable for a chip or not. Rather understandably he doesn't want to open them all up to find out.
I have a non chippable box from a turbo 940 (0 227 400 148) that I could swap in the deal so anyone willing to sell would still have a spare box.

just ask if he has any gold ones as they are all chippable as far as I know

Ha ha - I did ask him actually -said he'd heard of them but never seen one - like he was dubious that they really existed.
Thanks for your help - i've managed to find a gold box on ebay so panic over.

done a bit of reading and apparently the ezk boxes ending in 217 are chippable too,