940 Gearbox Mount Replacement
8 Attachment(s)
Thanks for all the forumers' information here and other sites, i replaced my Gearbox Mount, and here are some pics:
a) First Jack Up car and support on stand on firm solid ground Attachment 17402 b) Next support the axle on the UJ adjacent to the cross member where the Gearbox Mount is located. Attachment 17403 c) The Gearbox Mount is screwed onto the Cross Member plate, Attachment 17404 d) and this screw need to be loosened and have the nut and washer removed Attachment 17405 e) Then loosen and unscrew the 4 screws mounting the cross member plate below the Gearbox mount Attachment 17406 f) Once the plate is unscrewed, the plate can be taken out The mount is screwed on the plate from the top, loosen and unscrew the 2 screws to remove the mounting. Replace with a new mount and reinstall in reverse. Attachment 17407 g) This is how a new mount looks like. I bought the Meyle Brand as the manufacturer claims it is better than original and the price is cheaper. Attachment 17408 h) See the difference between a used and a new mount. This little height means a lot of difference in ride. Attachment 17409 |
All times are GMT +1. The time now is 11:07. |
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.