DPF fluid level error
 

Hi there, the Danish Forum is unable to help me, so hoping all you smart overseas people might be able to do so :cool:

Volvo V50, 2.0D from 2008 (the PSA engine with separate Diesel Particle Fluid tank for the filter)

I got the fault
- ADM-0004 Additive, tank level Level too low
and of course
- ADM-0005 Additive, tank level Level low

This causing a
- ECM-2584 Additive dosing module (ADM) Faulty signal

I added new DPF fluid, but the fault remains. I used VIDA to reset the fault, even had the battery disconnected for a long time. The fluid have been in the tank for a few months now and I tried some light knock/push on the tank hoping the the level sensor was stuck - all without any success. :confused_smile:

It seems like the level sensor is a part of the small DPF tank, so do I need a new tank or any other suggestions?

Have you checked in Vida to make sure the counter has been reset and the level is reset? I’d a physical readout on Vida to say the tank is 100% full.

Success :teeth_smile:

Went in and pressed the button to reset the Tank Level - and ta-da... Now it knows the tank is full - error now gone :_: