S40 diesel starting issue
Hi all,
I have just recently encountered problems starting my 2008 s40 2.0D Ignition position 1 and 2 happen as normal, but when I turn to position 3 there is nothing. The engine does not turn over at all. If I hold it in position 3 for anywhere between 5 to 10 seconds the cars starts. As far as I know, the battery and heater plugs are fine. Any ideas? Michael |
Is the key a loose fit? Although I haven't experienced it personally I've read that a loose fitting key can cause all kinds of starting problems.
|
Hi,
I don't think so. I can't feel any difference in the key since I bought it 3 years ago. It must be something else. |
Hi,
It would seem that your assumption was correct. I sprayed some Servisol switch cleaner in to the ignition and worked it a few times. A couple of days later I did the same, but with WD40. The car now starts first time as usual. I wouldn't have suspected the switch in a million years. Thanks. |
All times are GMT +1. The time now is 01:42. |
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.