BAROMETRIC SENSOR FAULT
 

last week as i was going over a pretty high speed bump my ecu light came on, volvo said it was the barometric sensor. they reset the codes and cleaned the sensor and sent me on my way - they only charged me £60 too!!!

but today as i was going over another high speed bump the ecu light came back on and i'm thinking its the sensor again. volvo want £125 to supply and fit the sensor but considering its a very straight forward job i'm going to fit it myself at £100.

but what i need to know is will the ecu light go off on its own when it detects the new sensor or will i have to pay volvo more money to clear the error codes???

because if the light does stay on i'll probably get volvo to do the repair as it'll probably work out cheaper.

thanks.

RE: BAROMETRIC SENSOR FAULT
 

it should go off after a few engine cycles, however why are you paying volvo daft money to read and reset your codes? obd2 code readers are available on e bay for around twenty five quid inc shipping i bought a creader a while back from the states and its saved me a mint

RE: BAROMETRIC SENSOR FAULT
 

what do you mean by a few engine cycles???

i did a search on ebay using "volvo obd2" as the keywords and nothing came up. :(

where did you get yours from and does it allow you to clear codes???

thanks.

RE: BAROMETRIC SENSOR FAULT
 

a few cycles is about 6, it should then clear if it doesnt disconnect the battery and it will reset ,go to e bay on the usa site, type in obd2 code reader and you will find a guy sellng the creader code reader there is lots for sale shipping about seven dollars make sure you get the type suitable for volvos as there are two types one is mainly for vag cars the other covers volvos and most other makes, yes they do clear codes and resets your light no problem

RE: BAROMETRIC SENSOR FAULT
 

is this the one you've got:

http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW

it says its not compatible with all volvo's, i've got a '98 s70r auto - whats yours???

any ideas what obd2 protocol my volvo would use???

how about this one:

http://cgi.ebay.co.uk/ws/eBayISAPI.d...978467128&rd=1

thanks.

RE: BAROMETRIC SENSOR FAULT
 

yes the creader(the top one) will work on your volvo its the same scanner as mine, my car is a 98 v70 t5 which like yours is fully 0bd2 complient the earlier models with the fennex ecu were not, yours certainly is

RE: BAROMETRIC SENSOR FAULT
 

thanks for the info, i'll order one today!!!

RE: BAROMETRIC SENSOR FAULT
 

no probs you will save a fortune, anyone who pays volvo to read their codes has more money than sense!!!

RE: BAROMETRIC SENSOR FAULT
 

or less sense than money!?!?!?!?!?! ;)

RE: BAROMETRIC SENSOR FAULT
 

Some independants will read the codes for free. It's hardly labour intensive!!

I really need to get round to ordering an OBDII reader. I keep putting it off ;)