Volvo Owners Club Forum
Page 1 of 14 1 234511 Last »
Show 40 post(s) from this thread on one page

Volvo Owners Club Forum (https://www.volvoforums.org.uk/index.php)
-   Performance Volvo Cars (https://www.volvoforums.org.uk/forumdisplay.php?f=20)
-   -   Smithy's 940 Dyno Videos (https://www.volvoforums.org.uk/showthread.php?t=108256)

santa20 Nov 1st, 2010 08:46
Smithy's 940 Dyno Videos
 
Smithy's asked me to post these for him. Enjoy :-)

+ YouTube Video
ERROR: If you can see this, then YouTube is down or you don't have Flash installed.


+ YouTube Video
ERROR: If you can see this, then YouTube is down or you don't have Flash installed.


+ YouTube Video
ERROR: If you can see this, then YouTube is down or you don't have Flash installed.

smithy Nov 4th, 2010 20:11
no one comments on the dyno run then

barkster1971 Nov 4th, 2010 22:38
figures
 
So what did it pull and where are the graphs?:thumbs_up:

BLARCHITECT Nov 5th, 2010 10:56
/\ snap!

Chesh740R Nov 5th, 2010 18:07
Quote:
Originally Posted by barkster1971 (Post 771574)
So what did it pull and where are the graphs?:thumbs_up:
Ditto. Otherwise nice vids, reminds me of the time i had my 740 on the rollers there.

smithy Nov 5th, 2010 21:33
Quote:
Originally Posted by Chesh740R (Post 772028)
Ditto. Otherwise nice vids, reminds me of the time i had my 740 on the rollers there.
it ran 290 bhp at 6k with standard t cam and standard l.h 2.4 no chips at all.with the cam the car would of pushed 300+ easly

Chesh740R Nov 5th, 2010 21:45
Quote:
Originally Posted by smithy (Post 772158)
it ran 290 bhp at 6k with standard t cam and standard l.h 2.4 no chips at all.with the cam the car would of pushed 300+ easly
I take it that was Flywheel figure, what was the Wheel Horsepower figure, if i recall that dyno gave print outs of that.

And some graphs would be nice to see, i'd be interested to see the curves with the Tcam in there. Also what the AFR is doing at various points.

smithy Nov 5th, 2010 21:56
Quote:
Originally Posted by Chesh740R (Post 772164)
I take it that was Flywheel figure, what was the Wheel Horsepower figure, if i recall that dyno gave print outs of that.

And some graphs would be nice to see, i'd be interested to see the curves with the Tcam in there. Also what the AFR is doing at various points.
i will get the graph up asap mate but i could not get a torque figuire the dyno could not get a good rpm signal off my leads witch peed me off a bit.268 bhp at the wheels mate and the afrs are spot on 11 to 12s all the way.

gdphillips Nov 5th, 2010 22:02
looks like you had fun ive asked a few people to look at mine as i want it chipped....herd lots of things on where not to go.....but the deal sounds good so will be popping up there soon ........

1stRaven Nov 5th, 2010 22:50
Looks like it pulls pretty well.


All times are GMT +1. The time now is 18:45.
Page 1 of 14 1 234511 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.