Volvo Owners Club Forum

Volvo Owners Club Forum (https://www.volvoforums.org.uk/index.php)
-   x40 S1 Wants (https://www.volvoforums.org.uk/forumdisplay.php?f=162)
-   -   V40 Marker Light (https://www.volvoforums.org.uk/showthread.php?t=72665)

kebab10 May 18th, 2009 16:40

V40 Marker Light
 
Does anybody have a bumper marker light for a Phase 1, ie 1997 V40 as the nearside rear one on mine has broken. Failing that, does anybody know of a bodge fix using an led perhaps. I know its a pain to remove, but leds last longer apparently.
Thanking you in anticipation

-chris- May 18th, 2009 20:20

They are sealed units so your best bet will be to buy a new unit. partsfor volvos sells them..

S40_Paul May 19th, 2009 13:34

As above, PartsForVolvosOnline.com sell's the unit's, about 18quid inc delivery. Be careful changing them though, can be bit fidgety.

kebab10 May 19th, 2009 14:20

Marker light
 
Thanks for the reply regarding this. Have got one on the way from a breaker for £7 all in. Seems a bit ridiculous to just ditch the unit. Is there any way you can drill out the blown lamp and make do and mend it? Done the front ones before and know the rear ones are a pain in the neck.

stevo48 May 19th, 2009 16:43

Ive just repaired the front bumper marker light on mine, the led is held in place with sealant, All you do is dig the sealant out, pull out the defective bulb then replace with new led and reseal with silicon. Make sure you cut the wires near the unit when removing marker light to ensure enough wire is left to reconnect when re-fitting unit.

kebab10 May 19th, 2009 16:52

Marker light
 
Cheers for that. Shall try that on Sunday when I get a chance to do it.

zippo1710 May 19th, 2009 19:44

yeah i got four LEDS for my s40 of e-bay £10.00 for the four took about 1/2 hour to do one but all same colour

S40_Paul May 19th, 2009 22:46

I'm quite lucky having the Ph2, remove lamp, twist clip, bulb holder comes out, replace bulb, reverse and done. upgraded mine to LED, was rather bright mind with clear marker lamps!

amarshe Dec 9th, 2009 15:08

I just fixed two sealed units on a pre-2000 S40.

Simples - I cut the cable about 5cm from the unit, removed it, pull out the sealant type stuff, soldered a new bulb (3mm capless) onto the two diodes, re-sealed with £3.99 silicone sealant from homebase, left overnight to set and re-fitted the next day by reconnecting the wiring.

Total labour time 20 minutes for two and around £6 including sealant.

kebab10 Dec 13th, 2009 17:45

V40 marker light
 
Cheers for all your help. Now I know I can fix the faulty one sitting in the shed so shall sort out the sealant and the bulb and holder and give it a go.


All times are GMT +1. The time now is 11:04.

Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.