Gauge Removal
 

How do you remove the econometer and outside temp gauge?
Thanks

Why you removing them? wanna sell them and associated pieces? but from the start

remove steering wheel, give the horn panel a good yank to reveal a nut

two screws up top gauge surround and two at bottom
pull cluster forward through. top first
unplug everything.
undo all bolts on the back. 8mm from memory.
black surround with clear plastic should come away
pull the backing off with the printed circuit still attached.
think that's all then you should have access to the encono and ext temp.

if you do wanna sell them and the outside sensor with wiring and vacuum hose let me know. will do a deal with some blanking panels i have for there.

Thanks Logan, that sounds easier than I thought it would be.
I'm removing them from my GLE before I sell it to my brother ;) then fitting them to my GLEi SE because a top spec car like that deserves the extra gauges :)

nicely said. Yea i think that's right. its been a while since i pulled a 360 cluster apart. Tried to fit them into my 87.

360
 

Hi mate.
Its also easier if you take of the panal below the steering colume,reach up behind the cluster and twist of the speedo cable.
Cheers Mark.
:thumbs_up::thumbs_up::thumbs_up:

^^ Yea forgot about that. hope its not too late for him! thanks :)

Won't be taking them out for a bit as I'm still using it lol, but I like to know what I'm doing in advance.

Fair enough. have you got some them blanking panels? or you gonna leave the holes there lol. and what's your bro's name? so i know who he is when he texts me

I'll send you a PM

sorry to jump in but whats a econometer worth? my 360 track car has one in and i keep thinking about takeing it out and putting it in my 340 but dont know if i want to start pulling my 340 apart to fit it

cheers