What am I missing from my Zenith 36 VN?
2 Attachment(s)
Hi all
Been tinkering with my 121 Amazon today and noticed that there was nothing connecting the choke flap to the choke mechanism (Photo). The choke flap just rotates freely. I could not see anything on the attached diagram that might do the job. I guess its not going to be easy to find a replacement. Might try Burlen on Monday, but think its a Volvo specific part. While looking directly below the carbs to see if something might have dropped into the lower wishbone pan I found the "dog bone" looking plastic piece. It listed as a "plastic retainer" for the float. Any ideas where it supposed to go? Also does anyone have a good source of information (book, web page) on rebuilding the Zenith 36VN. Mine is clearly leaking! Phil |
I've got a scrap carb in the shed, I'll see if I can figure out what's missing on yours tomorrow.
|
Thanks Oldfart!
|
1 Attachment(s)
This is what you need. It appears that the lever is not supposed to come off the spindle. Regards, Andy.
|
Andy
That looks what i need. I don't suppose you would want to sell it? Phil |
Yes, it's no use to me, as I've got another anyway.
|
Andy
Sent you a PM. Phil |
Sent you one back. Cheers.
|
All times are GMT +1. The time now is 20:22. |
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.