XC60 Bonnet Lock Broken
I had the warning light come on for the bonnet open, and after checking seems the passenger side bonnet lock is broken and will not close. So looks like i am going to have to replace it. seems the part no is 31425974.
To replace this will I have to remove the whole of the front bumper, or does anyone know if there is an easier and quicker way to do this? Any advice would be appreciated. Also, I have a feeling I am going to have to replace both sides as the micro switch on the drivers side is where the bonnet open alarm is coming from. |
Very common. It’s probably fine - spray a generous amount of wd40 on the left hand side latch (drivers side). Have a poke with a flathead and make sure it moves freely. Soak her in wd40 again and the message should disappear.
|
Thanks, however the passenger side is still broken and won't lock. so i will need to replace this. Will i need to removed the front bumper to change it over? I have spayed both with loads of WD40, message now seems intermittent, but passenger one will not lock. Tried to close it with a flat head screwdriver, and it will not catch at all.
|
Hi,
According to VIDA, for XC60 MY2015, you have to remove bumper front to access bonnet latches. And, when installing new one: "Make sure that the bolts are not tightened until the hood is closed". Torque: M6, 10Nm. BR |
Quote:
|
All times are GMT +1. The time now is 05:48. |
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.