08 xc90 tow bar electrics not working
Apologies if this had been covered I found some posts with conflicting answers !
Yesterday I purchased a 2008 xc90 with a tow bar installed and the new type (13 pin) electric point. Once home I plugged in my trailer and nothing works (trailer lights all working in other vehicles) Does a tow bar install need to be put through the car software to work ? Thanks Daniel |
It depends on how it has been wired. The best way is via the trailer module, which then integrates it to the car. If it has a universal towbar loom there is no telling what has been done.
I'd take it back to the seller |
Ok thanks. It’s all plugged in properly to the fuse panel in the boot. Iced checked all fuses too. I spoke to the sell this morning also. See what he says
|
If trailer lights are all not working, then it cannot be fuses.
Reason: each light is controlled by different fuses, so blinkers, brake lights, taillights, fog lights, reversing lights: they are all on differently fused circuits. But the common point is the ground wire(s) On a 13p plug there are two grounds. Check them for continuity using multimeter. |
Thanks now in daylight I’ve traced the loom and it appears the trailer module is missing. I have 2 spare plugs sitting out ! Phoned my local Volvo and hopefully can get it next week now. Hopefully there is no sinister reason for it not been there !
Thanks again |
All times are GMT +1. The time now is 19:53. |
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.