OK - Dragging up this old post as I have had these Goodyear Assurance wipers, had them for 6 months but not bothered to fit them till now.
I followed the instructions and used the correct fitting. I tried the instructions where it says to slide the fitting into the wiper arm first, then push clip in the wiper. I tried using the fitting and sliding the wiper into the arm in but failed as well.
I looked at the arm and can see in one side of the underside a little metal tab sticking out about 1mm - 1.5mm square that is blocking the fitment of these wipers. I thought this was just a spurious piece of metal but looking on both arms it seems to be a conscious design to force a particular type of fitment.
Anyone fit these wipers? I am half tempted to file down/remove that metal tab.
|