Here is an update of the rear end mocked up in the Amazon body.. I have some New Design Adjustable Aluminum Rear End Links and Panhard Bar being manufactured for this application, and for a stock arm replacement package. The custom link kit will directly bolt to the body and factory rear end assemblies also, which will help with replacement bushing issues for the factory links. This will also allow for all the possible adjustment I need, and allow this rear end assembly to go in all the models of Amazons and P1800's. This is mock up mountint is with the factory springs and shocks, to show that it is a direct replacement for the factory rear, but we also have a Coil Over Spring Conversion kit to eliminate the original coil springs and shocks. This will allow for better vehicle set up, and will also eliminate the pesky suspension sag these cars are plagued with.
These rear end assemblies will be offered in several packages.. Just the Floater rear end assembly that you can install any 9in ford carrier you may have.. A complete unit with carrier assembly already installed, and with your gear ratio and traction specs. With or with out the Coil over conversion. The links will be offered seperately for people that want to use them with the factory rear ends, but will have to be purchased with the New Design rear end assembly for ease of install.
Along with the gear ratio and traction options, these assemblie have numerous brake options up to 14 inch brakes. The pictures below, show the base level kit with general motor calipers. These calipers do have an emergency brake application, so nothing is lost there.
