[moshejay]

Hi
I have a volvo dice version 1, which i use on my volvo s40 t4 2002.
In the software tab there is a button 'advanced'.
When i pressed that it showed a screen where i can select a module eg ECM, DSA. I can then click 'send prog' or 'send reset'.

what happens (or what damage can happen) when i press 'send reset'?

i ask because i did press 'send reset' on DSA, ECM, & ABS and now peculiar things are showing up...like DSA code (ECM-13), ECM code (ECM-91 MAF sensor low reading), manifold intake press 2 is low(although that is now cleared).
The DSA light and the engine management light remain lit.
Or are those codes & lights because my MAF is malfunctioning?

The DICE says the reading from the MAF is 0 regardless of RPM.

AND....Before all this i cleaned the MAF using an earbud with iso-propyl alcohol..could THAT have caused/damaged the MAF resulting in all those other issues?

thanks