Quote:
Originally Posted by Darth Vol
After about 16 months away from cars to get head space I've split the failed B5234T5 engine down into its constituent parts.
So plan is to go for full rebuild.
Looking for information if possible for the part numbers required for the following:
- Bottom end bearings (Con rod bearings).
- Piston Rings including Oil rings.
- Head gasket kit components.
- Complete Timing belt components.
- Cam shaft seals - both intake and exhaust ones.
- Exhaust valves, Intake valves (Turbo).
- Valve Oil seals
- Water pump seal part number.
- Oil pump seal part number.
- Lower sump rubber seals
- Oil feed seals (bottom of engine where twin pipes feed to oil cooler.
- Oil cooler oil pipe seals (going into oil cooler).
- Head cylinder replacement kit and seals
- Thermostat housing seal.
- Cam cover anaerobic seal.
- Timing tensioner.
- Crank oil seal.
- Air intake Plenum seal.
- Exhaust manifold seal.
- Oil Dip stick oil seal.
- Turbo oil return seal.
- Bolts required to join the bottom of the long and short block together with other bolts that go with them (14mm, 12mm, 10mm)
Also seeking unbroken timing belt backing plastic that the timing belt cover is bolted onto with the 12mm bolt. Part number 9135040 - specific to turbo B5234T units.
Also on look out for an S60R exhaust manifold P/N: 30637921
Cheers.
|
that's going to cost you a fortune surely you should be fitting a good used engine for £500 ? what happened to your original ?