Quote:
Originally Posted by HDAV
Retro fittingsenus would be doable if costly even with salvage parts, cheaper and probably better is to get an aftermarket nav/camera unit fitted to the cubby. If you are lucky there may be a moulding you can buy if not may have to cut one into the cubby either find a local reputable car audio installer and pop in or get the screwdrivers (torx bits) our and strip the console and take the cubby out, measure up for likely units that might fit and go from three volvotech.eu sell cameras and interface kits but no screens.
There are a few Volvo mechs on here see what would be needed to upgrade to senses from a salvage unit.
Video here shows swapping but car had the loom connections already https://youtu.be/V6vBtomBW0I |
Thanks for this. Would the loom connections be similar on a 2010 model?