View Single Post
Old Sep 7th, 2019, 17:44   #20
Ummi60
New Member
 

Last Online: Jun 21st, 2020 02:45
Join Date: Aug 2016
Location: Virtsu
Default

Quote:
Originally Posted by davebb View Post
Hi you must have a vacuum leak at the mounts/pipes as at 1500rpm as
the vacuum actuator on the side of the air filter,switches off the mounts ,

The MAF that you fitted that is not working, What make is it ?
get a new O-ring /seal from Volvo for the pump,

Did you remove the oil separator ?
Dave
The maf that is not working is Hitachi brand
(Hitachi Hueco I believe).

Did not remove the whole oil filter assembly, was able to just remove the lid.
The membrane looked a bit crinckled but not broken. Cleaned the seals with a bit of fresh oil and a clean rag before Putting it back together.
Tbh it looked rather clean inside, no gunk or anything.

Regarding the "plop plop" noise and engine mounts.
I took the pipe going from the engine pads to the valve on the air box completely off and blocked it with my finger, still no change.
Ummi60 is offline   Reply With Quote
The Following User Says Thank You to Ummi60 For This Useful Post: