Ok so I have found a bulb holder for one of the rear lights with a bulb in it will this work for the tester? I’ll solder a couple of wires on.
Just thinking back, the only wiring that could have possibly been disturbed, was any wiring near to and including the open bonnet sensor, and the wiring to the fan relay, and any other wiring that appears to go towards the back of the headlights near the fan/radiator. I moved this out the way to remove the intercooler. I clipped it all back in place after I re-fitted the intercooler – do you have any idea whether any of these wires could be linked to fuse one? No worries if not!
|