Quote:
Originally Posted by Laird Scooby
Silicone grease. Buy a tube of it, rub some round the rubber part of the seal and leave to soak for about 15 minutes. Wipe the excess off (don't rub) then move the roof panel into a different poisition (tilt instead of slid back or vice versa) and repeat for the part of the seal you couldn't get to before.
Do this monthly for the first 3 timesthen 2 monthly twice and then 6 months later followed by a year later then do it annually.
You can also use silicone grease on the mechanism, it's waterproof and doesn't stain like lithium based grease.
Also, before winter, treat the door and boot/bonnet seals the same way, cleaning the areas on the doors/boot/tailgate/bonnet that mate with the seals. This will help ensure the seals don't freeze to the panels and help keep them supple enough to move freely.
Silicone oil is good for your lock barrels and latches on the doors and higne pins too.
Don't get any on the glass though, it smears and is a right pig to get rid of!  |
Again, thank you so much. This sounds perfect. I really appreciate the help.
Take Care,
Mike