Quote:
Originally Posted by arcturus
To remove choke unfasten the cable from carbs,there is a flat nut on the inside of dash which needs to be undone and the whole assembly comes off as a single unit. Will post pic' later. To polish black plastic knobs if you have access to lathe or pillar drill, fasten and spin then with a piece of heavy fabric and some metal polish and then wax. Bit of a waste of time really as they will soon dull again with use. (sweaty fingers)
|
Arctrus, my set up is different than yours, please see attached pictures. The arrow shows where the tip of the handle goes into the actuator