Quote:
Originally Posted by Rustinmotion
Thanks Alan, just confirm your car is standard springs and roof height is 1530, that's a good starting point, if you have time can you measure center of axle to floor and suspension arm pivot centre to floor, no matter What tyre or wheel the difference between the two should be constant for any given spring length, a 40m drop would not change axle centre to floor but should drop the pivot point 40mm. Knowing this dimension for a standard set up on good springs would be the benchmark to check against.
My roof height is 1440
|
Good morn,
GAM is as standard and has 165/80R15 tyres fitted..
The roof height is 1480mm (perhaps the saloon is shorter - I don't know).
The wheel axle to ground height is 300mm with the 165/80 tyres.
The rear suspension to ground height is: 245mm (measured to this fulcrum):