Volvo Owners Club Forum - View Single Post - 240 General:

grumpydad · Feb 4th, 2023, 23:42

Hi
in no order

you will need to take the dissy off the back of the head and put it where your dissy is now so you will have to replace the oil pump drive take it from the engine you take out time for that job 1 1/2 hours

look at https://www.davebarton.com/ for all your wiring stuff
have you got both the fuel and spark ecu

prop shaft its a cut and shut job front 940 weld the 240 one to it before the centre bearing only problem is the 940 one is bigger so you will have to make a slug to go in both props and weld it

fly wheel make shore you get it in the right place or it will never start

4 dont understand ?

oil filter jus use the stuff that on the b230 ft

you will have fun with the steering column and exhaust

intercooler ?

MAF ?

have you still got the hole 940 ?

Feb 4th, 2023, 23:42	#2
grumpydad Senior Member Last Online: May 23rd, 2024 01:16 Join Date: Dec 2015 Location: eastsussex	Hi in no order you will need to take the dissy off the back of the head and put it where your dissy is now so you will have to replace the oil pump drive take it from the engine you take out time for that job 1 1/2 hours look at https://www.davebarton.com/ for all your wiring stuff have you got both the fuel and spark ecu prop shaft its a cut and shut job front 940 weld the 240 one to it before the centre bearing only problem is the 940 one is bigger so you will have to make a slug to go in both props and weld it fly wheel make shore you get it in the right place or it will never start 4 dont understand ? oil filter jus use the stuff that on the b230 ft you will have fun with the steering column and exhaust intercooler ? MAF ? have you still got the hole 940 ? Last edited by grumpydad; Feb 4th, 2023 at 23:49.