Quote:
Originally Posted by IainG
Hi All
I have had an ongoing saga getting some repair terminals to replace the Data circuit pins on the 3 plugs that plug in to the CEM
I also changed the Housing and terminals on the Accelerator pedal.
I went by previous information on here and ordered the CEM terminals under Number 30656678
I ordered 7 of these from Volvo and when they came they were the wrong ones. Volvo reordered them in case the wrong ones were in the "Bin" . Same incorrect one arrived.
Checked via Sweden and they gave another number 30656698. Very similar so I wonder if the number on this forum has been miss typed and then just copied.
The correct numbers for everything are below
8690595 Accelerator plug housing x1
30765498 Repair terminal for Accelerator plug housing x6
30656698 Repair terminals for CEM x6 for Data and x1 for accelerator signal wire.
CEM Plugs terminals changed are in picture below plus I changed the accelerator signal wire which is Green plug terminal G31(white wire)
The Green plug is shown in the photo below. The Blue and Brown plugs look similar and use the same terminals. The black plug is for the accelerator pedal.
|
I am just wrestling with 'wonders' of the Volvo CEM electrical gremlins and you posts have been helpful so firstly thank you for the posts & pictures.
I come here seeking advice, I have removed and carefully examined (to the best of my limited skills) all accessible parts of the CEM from my 2009 V50 T5. Long story short I now await back from Volvo Diagnostics a replacement CEM as the cleaning up of the photographed corroded pins cured the issues but they quickly returned. So I now wish to replace at least three of the corresponding female pins from the large green CEM plug due to them looking pitted / corroded and wanted to confirm that part number 30656698 is the pre wired component I require. Any input would be appreciated.