Headlight adjustment bolt not working
Hello.
One of the issues I encountered this week at the MOT is that the right headlight was set up too high. Today I was doing different reparations at the car and decided to quickly check that box out of the to-do list.
Since it was daylight, I had the brilliant idea to use the left headlight as a reference by tightening its bolt all the way down counting the turns. The idea was, to then bolt the right headlight bolt all the way down as well and then undo as many turns as I counted for the left headlight.
The problem is: there was no end point for the bolt on the left headlight, and it looks as if the bolt had gotten detached inside of the regulator. Now the left headlight is pointing all the way up and I can not bring it down. Thankfully, the right headlight was set up correctly.
Do you know if it's possible to open this regulator and check if the bolt came out of place inside?
|