Quote:
Originally Posted by Rcdean
What charger are you using?
Reading the CEM takes about of juice.
Ideally you want one that outputs at least 10amps, I used a 20amp charger and battery voltage never dropped below 13.5V.
That was about 4hrs on P3TOOL that didn't find the pin.
Then about 25mins on VDASH
Wish I'd tried VDASH first.
Also try clearing the error codes before searching the pin, that could also be stopping the search.
|
Thank you!
Will try all of the above. I had the car charger on slow charge so will ramp it!