Quote:
Originally Posted by Dandle
You shouldnt really be fitting HIDS into light reflectors made for halogen bulbs. The light scatter will be all wrong, HIDS are normally fitted into projector lenses as they cutoff the light correctly at the edges of the beam. You will also find if they run aot hotter than the halogens they replace they will eventually start to burn off the reflector silver near the bulb.
An alternative halogen lamp is the Osram Silverstars, they give alot more light over standard and are a merked improvement.
|
this is not the case at all
1 they do not blind any one because the bulb is behind a bulb cover inside
the lens
2 light scatter is the same
3 hid,s run cooler than halogens but not much (i used inferred temp meter)
i'v fitted hi beam too and trust me you will see for miles. mine have been fitted for over 2 1/2 years with no problems