View Single Post
Old Jun 15th, 2009, 16:56   #2
jco
Member
 

Last Online: Jun 26th, 2017 10:04
Join Date: May 2009
Location: Rossett
Default

Sorted!
1 - Undo the two bolts on the back of panel - 8mm I think
2 - Pull off the door seal strip from the surrounding area where it covers the plastic trim
3 - Pull firmly upwards - I started on the left of centre and then did right of centre

Panel is held with a mix of plastic fasteners - I didn't break any this time and if you pull up vertically you should be OK
NB - watch the very end of the panel don't get caught in the luggage fastening rails
jco is offline   Reply With Quote