View Single Post
Old Sep 18th, 2002, 19:52   #3
Multiplex
Senior Member
 
Multiplex's Avatar
 

Last Online: Jan 29th, 2019 22:42
Join Date: Dec 2001
Location: North West
Default RE: no power to ignition coil.

Hello

There are two relays under the dashboard on the driver’s side (behind the fuse box). The relays are for the fuel pump and the ignition/fuel ECU. The wire from the coil goes direct to the ECU, which is located behind the driver’s side kick-panel in the foot well. The coil should have a live and earth (both from the ECU) and also a pulsed feed from the ECU.

Check the earth connection on the engine just behind the oil filler cap as these often break and on some engines/ignition systems can cause it not to start.

Regards Chris.

Multiplex is offline   Reply With Quote