You from US of A? Check the Brickboard, huge amount of info there and very active forum too.
http://www.brickboard.com/FAQ/700-90...InjectionFault
You can ignore 221 and 113, these are consequences of the main problem.
LH 1-2-3* Signal missing to/from coolant temp. sensor Wiring fault to or in ECT sensor;grounds corroded on intake manifold or engine Difficult to start engine when cold
EZK 2-2-4 Engine coolant temp (ECT) sensor signal absent or faulty Faulty wiring or ECT sensor
Both point to the same thingy, I think you should examine that further. It has two sensors under the inlet, one for ecu, one for gauge. Are you sure you renewed the right one? Also recheck the wiring and the connectors.