I now have permission for attachments. The four round black spots on the right are the four rubber plugs I talked about. Check to see if you have the equivalent on your RHD car.
Looking at that photo, if the bond in the glass right above the glove box had a significant failure I expect that it would be possible for moisture to work its way up under the glass and down into the glove box area. However, to have a significant accumulation of water I would expect that you would have to be shooting a pressure washer directly below the window trim in that area for an extended period. On the bonded windshield there is a piece of plastic trim between the base of the glass and the top of the dashboard. If you pull back this trim (carefully because it is easy to break - long and flimsy) it will expose the base of the glass and any water ingress should be obvious.
Last edited by 142 Guy; Oct 15th, 2020 at 20:01.
|