Volvo Owners Club Forum - View Single Post - Amazon:

dheming · Feb 5th, 2014, 21:59

I've done quite a bit of work since my last update here. The outer brackets are welded on so all six of them are done now. Also made some new lower mounts to work with the short QA1 coilovers I bought originally. They have a ride height of only 10" (25.4cm) vs the 14" (35.6cm) of the ones I designed all this for. So these new mounts moved the bolt 4" (10.2cm) higher up to make them work for now. This set up is just to allow me to move the car. Later on once the dust settles I'd like to get the real coilovers in there:

Panhard rod mount:

Other side primed and ready for install:

Feb 5th, 2014, 21:59	#290
dheming Member Last Online: Jun 29th, 2022 04:38 Join Date: Mar 2009 Location: Corvallis, Oregon USA	I've done quite a bit of work since my last update here. The outer brackets are welded on so all six of them are done now. Also made some new lower mounts to work with the short QA1 coilovers I bought originally. They have a ride height of only 10" (25.4cm) vs the 14" (35.6cm) of the ones I designed all this for. So these new mounts moved the bolt 4" (10.2cm) higher up to make them work for now. This set up is just to allow me to move the car. Later on once the dust settles I'd like to get the real coilovers in there: Panhard rod mount: Other side primed and ready for install: __________________ "Why is it that there's never enough time to do it right, but there's always enough time to do it again?"