Only reason I ask is I took the PV in for it's inspection yesterday and the emissions were way high. after weakening the mixture a bit I got it to an acceptable level for them but still high. So, now the carbs are unbalanced I will need to start again. I usually check plugs for color after a run, colortune is all right for a ball park setting but not terribly sensitive. Emissions setting of carbs is alright with a single carb but not very helpful with two,One can be weak and the other rich and still give acceptable emissions reading. I usually finish off with the vacuum carb balancer.
__________________
life's too short to drink bad wine
|