Volvo Owners Club Forum - View Single Post - D type overdrive output flange and short prop

JP 1800 · Feb 24th, 2019, 20:08

Hi Volvo 133, many thanks for getting back to me, the overdrive unit I have is from an early P1800 and has the type 1 fitting which uses the u shaped bolts to attach the universal joints to the rear of the overdrive, I am looking for the later small circular type that attached to the corresponding flange on the prop shaft. My current output shaft has 8 splines so only an 8 spline type will do, is this the type you have and would it be possible for a picture of the output flange?. on a final note the flange if suitable can be shipped to Belfast as it will be then sent down to my PO box in Dublin as this works out more convenient for me

Thanks again

JP

Feb 24th, 2019, 20:08	#7
JP 1800 Master Member Last Online: Apr 26th, 2024 10:52 Join Date: Aug 2009 Location: Dublin	Hi Volvo 133, many thanks for getting back to me, the overdrive unit I have is from an early P1800 and has the type 1 fitting which uses the u shaped bolts to attach the universal joints to the rear of the overdrive, I am looking for the later small circular type that attached to the corresponding flange on the prop shaft. My current output shaft has 8 splines so only an 8 spline type will do, is this the type you have and would it be possible for a picture of the output flange?. on a final note the flange if suitable can be shipped to Belfast as it will be then sent down to my PO box in Dublin as this works out more convenient for me Thanks again JP Last edited by JP 1800; Feb 24th, 2019 at 22:27.