Quote:
Originally Posted by aslan
Yes. So far it's been ok since Apr 2019.
|
[QUOTE[IMG]
[/IMG]
I removed the motor again today. Pryed open the sides to remove the coil.
Cleaned up the black graphite bits from the motor. Look like the brushes have been thined down due to the age of the car. May be that is why the connection issue.
There is no absolute way to replace the brush because it is not push and play. There is no screws. I think just to replace the Motor is best way from junk yard or eBay.
Pain in the neck bit was when removing the motor there is a small cup in the ABS unit where the motor spindle goes thru, this part came off with motor.
As you can see in Aslan's post, it is held between two small pushing rods in the sides. This cup came off and it took nearly 3 hrs to figure out to push it back .
Who ever doing this in future take a note of this and use some thing to wedge between motor and abs unit when removing so it won't come off with motor.