Quote:
Originally Posted by charlotte001
I would check to see if the tensioner is operating correctly and or is the belt stretched oh did you use a new belt? Hopefully you haven't bent any valves as it's half a tooth out and depending on how many times you've tried to start the car you may or may not have done damage to the valves.
Replace the belt and see if that resolves any issues with the car
make sure the engine rotates without resistance if there is a lot then the head will have to be removed to check the valves for bending otherwise try replacing the belt
|
not yet changed the belt, and it starts first time etc, just it runs on when you turn it off, has been doing it for a few wks etc. gunna try and up load the short vid of it .