Quote:
Originally Posted by Othen
Nothing much to report on the project this week. I had noticed the RB had developed a small oil leak on the right side of the engine. A little investigation of the usual suspects soon identified the culprit: the cam cover gasket. I had taken it off to check the valve clearances some weeks ago and taken a chance on not fitting a new gasket, the old one looked okay.
No matter, I had a spare anyway and got the new one fitted in about 15 minutes. The oil is staying inside the motor again now - which is nice.
:-)
|
Always good to have the oil where it should be Alan!
You're reminding me i need to do mine - valve clearances and rocker cover gaskets. Not quite so simple on mine though!
