Hi Clan,
I did as you suggested with no joy. Took out the glove box to be able to get to the CEM and took it out, cleaned it up and sprayed with WD40 on all plugs and connections. Had a look at all the fuses also.
I did manage to have a friend bring up a diagnostic tool, and it spat out the codes:
U0101-00 - Lost communication with the Transmission Control Module (TCM). General Failure information, No Sub Type information
C0034-15 Right front Wheel Module. General Electrics Failures. Circuit short to battery or open
C0034-15 Left front Wheel speed senor. General Electrics Failures. Circuit short to battery or open
U0001-55 High Speed CAN communication bus. System programming failures. Not configured.
I've ordered a used gear assembly, but looks like that is not going to do the trick...Any suggestions or advice on the codes? getting pretty worried now :/
|