[v8disco]

I had to change the wiring on XC90 monitors when I fitted them to my V70 and it is quite straightforward.

Basically just chop off the large 6 or 8 way connector and identify the red and black at one end that have slightly shinier insulation than the rest. These are your power and earth. Then select the yellow (and its earth) which is your video, and that is it. Connect these, tape back the rest and job done.

If you want to convert to RCA type connectors, you could do what I did and buy a cheap short scart to RCA lead (mine were £3 from Tesco). Then remove the scart end and all you need to do is join the monitor yellow and black to the adaptor lead and you can then plug the yellow into your dvd player. I dont think your player can feed the power but if you dont want to hardwire into the cars wiring, buy a cigarette socker adaptor and just wire both screen power and earths into that.

Best to solder all joins and cover with heatshrink.

Hope this helps

Martin