Quote:
Originally Posted by uniqueue
If the red indicator is still showing this suggests that the bar is not properly engagedand I would want to get that checked as soon as possible .....
If the indicator is working correctly then the removeable part isnt locked in properly.!!!
The key only prevents the release mechanism from turning, it has no effect on the mechanism that attaches the removeable bit .
dirt somewhere is the likely place to start .
|
Good spot uniqueue.
So the movement I refer to is no more than 1mm.
From my own experience it is easy to get the locking wheel out of position but that usually results in the drawbar not engaging with the hitch receptor.
If you've still got the red indicator and it is semi engaged it could be suffering corrosion in the mechanism. Try flooding it with wd40 or similar and perform numerous sets of engaging and removing to see if it frees off, engages properly and you have the green indicator.
Oh, and Brissle....you can keep the rain.