View Single Post
Old Nov 25th, 2009, 08:25   #21
MikeHill
New Member
 

Last Online: Mar 31st, 2010 21:30
Join Date: Sep 2009
Location: Faversham
Default

Yes that is the hose - the filter does not seem to be shown in your diagram, but is cylindrical perhaps 2 inches long, follow the hose back up from the distributor which is mounted on the front of the engine. Hopefully the hose is secured onto the filter with a jubilee clip you can undo with a screwdriver although elsewhere on my S80 there are clips which you cannot easily do up again which have been secured with some sort of special tool. If the tube is not secured with a jubilee clip you will need to buy one before you start - probably the smallest available costing pence not pounds, to replace the clip you will have removed to disconnect the pipe.
Good luck with it and I hope it works for you as it has for us.
If I can I'll put a pic up showing the filter on the wife's S80 in the next day or so.

Last edited by MikeHill; Nov 25th, 2009 at 08:27.
MikeHill is offline   Reply With Quote
The Following User Says Thank You to MikeHill For This Useful Post: