Well, the overdrive gearbox weight lifting session was not 100% successful. Flywheel was indeed in wrong place, now sorted, but there is still no spark.
Ive tried another powerstage that I know to be good, and another flywheel lead. Even tried swapping back both the old 200F 240 ecus but nothing. Codes keep coming up as 111 which is odd-I tried to store a code by cranking with the flywheel lead off but it didnt register it.
Tried using the later ign switch which made no difference, as expected.
I don't recollect there being an immobiliser on the donor Turbo200FT 940, J or K reg(it was about five years ago it got broken up).
There must be a live or earth missing, will need to go through them when I next get time.
There is no cold start injector on this manifold (200FT), yet I have a spare wire. Can't see that would cause this.
Beginning to run out of ideas.
Thanks, Jim
|