[Bashy]

This morning I have mostly been screwing up....

Iv changed the plugs with new and cha gwd the injector with the 2nd user replacement, I forgot to screw on diesel pipe to injector, so had a bit of cleaning up to do around the injectors. Only noticed when it wouldmt start :/

On the plus side, it turned over a lot better, once I sorted the pipe and cleaned up, I noticed a tiny bit of bubbling around the injector, I used a new fitting kit too, so had to remove it, clean it up, rebent the clamp and fitted it again, no bubbling,

A lot of smoke but cleared up on the test drive, did about 6 miles, all seams ok, I won't know if the tappi g is resolved till I've been on a further trip (shopping Tuesday) but none so far, may know if the starting issue is resolved tomorrow morning hopefully.....