Volvo Owners Club Forum - View Single Post

CLIVERALLY · Aug 10th, 2018, 19:20

Got a replacement clutch slave cylinder, fitted and bled. The issue is that the push rod supplied with the slave is long and when fitted I cannot get the nuts started on the push rod as the clutch arm does not allow it..and gives no free play what so ever . I have tried fitting a push rod from an old master cylinder which seems to fit better but again no free play and what appears very little movement...I am puzzeld ... Any ideas?

Aug 10th, 2018, 19:20	#1
CLIVERALLY Master Member Last Online: Apr 18th, 2024 23:55 Join Date: May 2010 Location: wetherby	clutch slave question on P1800 Got a replacement clutch slave cylinder, fitted and bled. The issue is that the push rod supplied with the slave is long and when fitted I cannot get the nuts started on the push rod as the clutch arm does not allow it..and gives no free play what so ever . I have tried fitting a push rod from an old master cylinder which seems to fit better but again no free play and what appears very little movement...I am puzzeld ... Any ideas? __________________ Clive "Lets turn up the juice and see what shakes loose"