Thread: 460 non start
View Single Post
Old Jul 18th, 2019, 18:22   #1
bimmer49
Always listen & learn!
 
bimmer49's Avatar
 

Last Online: Mar 13th, 2023 20:32
Join Date: Dec 2013
Location: Winchester + Malaga
Default 460 non start

As for quietly having this 460 away un noticed......
New fuel, whacked the starter (wouldn't go at first) but no attempt at firing up.
The fuel pump isn't pressurising the system.
Fuel in the common rail but not under pressure when ignition on or cranking.
(No schrader valve on this model!!).
In the book it says there is a F.I. fuse behind the glove box but after hooking that out all I see are a load of block connectors.
Connection is good to the tank sensor/pump but I didn't put a meter on the connector (pushed for time and 33deg!)
I whacked the top of the tank sender a few times just incase it was a stuck pump.
Been parked up 3 years at least.
Any idea on these fuses (2 according to the manual) location behind the glove box/
__________________
264 V8 5.0L
V40 BiFuel, she's gone, she's dead......Oh well!
bimmer49 is offline   Reply With Quote