Quote:
Originally Posted by Daz Newell
Hi...my auto box is slipping when it changes gear but once in gear it pulls like a train even if i floor it....would a fluid change help the slipping in between gear changes and if it would is there any pics or help on how to do it...mine is a V70 D5 2007 geartronic 185.
Thanks
|
It is so easy to do all you need is a 17mm hex and a couple of torx bits (be careful as the one on the top is quite large (t60 from memory?). Also need the 2 gaskets and an o-ring. I have previously done a write up on how I did it.
Best bit of advice I can give you having spent considerable time here is to NOT cycle the gearbox through P, R, N and D for 2 seconds but rather do the first dump and refil and then leave it a week or so to stick a couple hundred miles in. It’s clear that putting the vehicle into gear for 2 secs or even 10 does not circulate the fluid through the box.