Sometime since an update. The exhaust bypass was welded and fitted to the car. I managed to get a vacuum bleed valve to open/close it with some success but it really need's a solenoid and pressure switch. I have that ready to be installed.
The 19T is now installed and working well up to 10psi but I noticed the wastegate is jammed on the oil return so a job for later. My mistake...
The power steering rack was replaced as it was knocking. However I was still getting a vague feel/tugging on long sweeping bends. I have since replaced the pump and it now feels good but needs a long run out.
And I lost the seats in the boot. One of the seat belts was ripped so rather then replace I chucked the lot. No one wanted them.
MOT Passed with no comment :-)
|