Thread: V70 G/box: 2WD: - Transmission fluid
View Single Post
Old May 16th, 2014, 02:09   #4
Patdelamare
Junior Member
 

Last Online: May 16th, 2014 17:36
Join Date: Jul 2011
Location: Devon
Default What ATF FLUID

i have used this particular ATF, its cost effective very good quality.

It exceeds Mobil 1 spec, and Toyotas ATF fluids.

I have personel knowledge and would never use any other fluid in a auto gear box.. It exceeds the maximum requirements set out by Mercedes , Bmw, etc etc.

data as follows.


This is a copy of the data sheet I was sent, is this the sheet you have been reading.




DURADRIVE TM MV SYNTHETIC AUTOMATIC TRANSMISSION FLUID MULTI-VEHICLE ATF
Introduction
Petro-Canada DuraDriveTM MV Synthetic Automatic Transmission Fluid (ATF) is our best multi-vehicle ATF. This full synthetic formulation offers true multivehicle performance, outstanding wear protection, and exceptional fluid life. DuraDrive MV Synthetic provides the frictional properties, wear protection and viscometrics needed by most major North American, Asian, and European automatic transmissions. It is specially formulated to provide consistent shift feel and transmission protection over a long fluid life. DuraDrive MV Synthetic’s benefits include excellent oxidation and shear stability, outstanding wear protection, and exceptional low temperature fluidity. It also provides industry leading anti-shudder durability (ASD) and frictional stability; exceeding the performance of many genuine OEM fluids.
DuraDrive MV Synthetic ATF uses Petro-Canada’s 99.9% pure, crystal clear PURITYTM VHVI synthetic base oils. Used in combination with leading edge additive technology this allows DuraDrive MV Synthetic to retain its “fresh oil” properties longer, thereby delivering superior performance and superior savings. DuraDrive MV Synthetic also provides savings through inventory consolidation by offering true multi-vehicle performance.
Features and Benefits
• Excellent resistance to oxidative and thermal breakdown
• Prevents corrosion and the formation of harmful sludge and deposits. Keeps transmissions clean & functioning properly
• Protects clutches from glazing
• Passes General Motor’s Oxidation Test (GMOT) and Ford’s Aluminum Beaker Oxidation Test (ABOT) illustrating superior oxidation resistance
• Exceptional low / high temperature fluidity
• Delivers quick lubrication of transmission
components in cold weather
• Maintains desired viscosity & oil film strength in high temperature operation
• Earlier drive away and smooth gear shifting during low temperature operation
• Efficient heat removal from clutch surfaces, extends clutch life
• Outstanding anti-wear protection
• Reduces wear on bearings, bushings and
gears
• Extends transmission life
• Suitable for heavy loading & high operating temperatures
• Outstanding anti-shudder durability and stable friction properties
• Excellent shift quality throughout ser vice life
• Avoids vehicle shudder while stopped
• Maintains transmission ef ficiency & fuel economy
• High torque capacity avoids clutch slippage & wear
• Prevents clutch shudder in modulated torque converters
• Clutch plates and bands last longer
• Compatible with all transmission seal materials
• Helps to maintain seal integrity and prevent leaks
Applications
Petro-Canada DuraDrive MV Synthetic ATF is suitable for use in a wide range of North American, Asian, and European automatic transmissions.
• Fully approved against MERCON®-V (M5080701)
• Exceeds JASO 1A requirements
• Suitable for use where the following OEM specifications are recommended:
• GM: DEXRON®-II, DEXRON-III
• Ford: MERCON, MERCON-V
• Toyota: T-III, T-IV, WS
• Honda: Z1, DW-1
• Hyundai/Kia/Mitsubishi: SP-II, SP-III, SP-IV, J2, Red-1
• Nissan: Matic D, J, K, S
• Mazda: M-III, M-V
        
• Mercedes Benz: 236.1/.2/.3/.5/ .6/.7/.9/.10/.11
• Saab: 93 165 147
• Saturn: Saturn ATF
• Subaru: Subaru ATF, ATF-HP
• Suzuki: 3314, 3317
• BMW: 7045E, LA2634, LT71141, P/N 83 22 0 142 516
Typical Performance Data
Density, kg/l @ 15°C (60°F)
Colour
Flash Point, °C / °F
Pour Point, °C / °F
Viscosity,
cSt @ 40°C / (SUS @ 100°F) cSt @ 100°C / (SUS @ 210°F)
Viscosity Index
Brookfield Viscosity, cP @ -40°C (-40°F)
Qualification Numbers Ford
Product Identification Code


• VW/Audi: G 052 162, G 052 990, G 055 025, G 055 005, G 055 162, G 060 162
• Volvo: pass car 4-6 speed, 97340
NOT recommended for CVT and DCT transmissions or when a non-friction modified fluid is recommended (e.g. Ford Type F).
Always consult the vehicle owner’s manual for specific transmission fluid recommendations.
ASTM TEST METHOD
DuraDrive
MV Synthetic ATF
PROPERTY
ASTM D4052
Visual
ASTM D92
ASTM D5950
ASTM D445
ASTM D2270
ASTM D2983

0.852
Red
206 (403)
-54 (-65)
36.1 (183) 7.4 (51)
178
11,538
MERCON ®-V M5080701
DDMVATF
The values quoted above are typical of normal production. They do not constitute a specification.
Health and Safety
To obtain Material Safety Data Sheet (MSDS), contact one of Petro-Canada’s TechData Info Lines.
TechData Info Lines
If you would like to know more about Petro-Canada’s DuraDrive MV Synthetic ATF, or any other product in Petro-Canada’s complete line of quality lubricants, please contact us at:
Petro-Canada Europe Lubricants Limited Wellington House, Starley Way Birmingham International Park
Solihull, B37 7HB, United Kingdom
Telephone............... Fax ................... UKWebsite.............. GermanWebsite .........
+44(0)1217817264 +44 (0) 121 781 7401 www.petro-canada.co.uk www.petro-canada.de
Lubricants Head Office Petro-Canada Lubricants Inc. 2310 Lakeshore Road West Mississauga, Ontario Canada L5J 1K2
Canada -West........... -East(English).... (French).... OtherAreas............. E-mail.................. Website................
Phone1-800-661-1199 Phone 1-800-268-5850 Phone 1-800-576-1686 Phone (416) 730-2408 lubecsr@suncor.com lubricants.petro-canada.ca
Petro-Canada America Lubricants 980 North Michigan Avenue Suite 1400, #1431
Chicago, Illinois
USA 60611
Phone ................. 1-888-284-4572 Fax.................... 1-708-246-8994
E-mail ................. email@petro-canadaamerica.com
Petro-Canada Asia Pacific Holding Company Ltd. Jia Shi Lubricants Trading (Shanghai) Co. Ltd. 1908 World Trade Tower
500 Guangdong Road, Huangpu District Shanghai, China 200001
Phone ................. Fax ................... E-mail ................. Website ................
+86-21-6362-0066 +86-21-6362-0536 asiapacific@suncor.com www.petrocanada.cn
IM-8043E (11.12)
Petro-Canada is a Suncor Energy business
TM
Trademark of Suncor Energy Inc. Used under licence.
PRINTED IN CANADA PRINTED ON RECYCLABLE PAPER
Patdelamare is offline   Reply With Quote