Quote:
Originally Posted by phutyle
For fitting, you're going to have to go through the rigmarole of removing the whole waterfall section, starting with the screws back in the armrest storage, and eventually ending up with you being able to remove the head unit. Here's a copy of the official instructions ( http://ww2.justanswer.com/uploads/In...er_console.pdf), but there's also plenty of guides online and some videos on YouTube. I would advise the use of a long shaft torx screwdriver to take out the 2 screws by the handbrake. I can't remember if they're T20 or T25, but you are unlikely to be able to reach them with a multi-head swappable set. Also a set of nylon trim removal tools will make life easier.
I bought my FM Modulator from Amazon (link in my original post). I didn't need any adapters to connect it to the aerial port (2010 V50 with Performance audio system). I don't know if different years or different systems used different ariel ports. |
Thanks a lot for your reply. When you say it’s powered by the 12V, do you have to wire it in or does it just plug in? I’ve not had any experience with wiring and I can just see myself causing much more damage!!