[ukden]

There is definitely no facility for changing them in Sensus.

They do give a very sharp cut off with the light beam being horinzontal to the offside, but the beam being angled by about 20 to 30 degrees upwards to the nearside in a very clearly defined straight line. It would clearly dazzle oncoming traffic on that side.

The loading of the car is not an issue as the headlight self levelling system works well. It is fascinating when you start the car in the dark. The lights go through a levelling procedure, they first go fully up, then fully down before settling at the correct height to suit the car loading. Very entertaining.

I suspect the answer is going to be blanking part of the light with tape. Very low tech. Unless someone knows better.