[BasZ]

Originally Posted by morwenna240

My clock has now been running well for two days, on it's baco-foil fuse. An auto electrician suggested using normal solder, an then fitting an inline fuse of suitable rating. According to manual, the clock is rated at 2 watts. That gives an amperage of .16 , see if can find a suitable fuse. Also, i've emailed Kienzle, inviting comments an if they will do a refurbish.

Clan, surely every 140 has a clock, must be a few about? Or have people converted them to a modern quartz movement? Anybody done this?

Hi there - would it not be possible to put a simple 160mA inline glass fuse?